Ca-42 Data Cable Driver Download ((INSTALL))

Nokia CA-42 drivers will help to eliminate failures and correct errors in your device's operation. Download Nokia CA-42 drivers for different OS Windows versions (32 and 64 bit). After you have downloaded the archive with Nokia CA-42 driver, unpack the file in any folder and run it.

Ca-42 Data Cable Driver Download

Download the driver for this lead (This is a zip file containing Cell Phone Manager software and drivers for Win98 and W2K)Information (This is a text file with information and links to OTI (chip) related information)Other drivers (Win98 and 2K) (This is a zip file containing Win98 and W2K drivers for the OTI chip within the cable)Windows 7 (Vista) Driver (This is an exe which is a driver for Windows 7 and Vista)Nokia PC Suite (This is an original copy of Nokia PC Suite)

The driver can be used for Windows Vista, XP and 2000. You will also need a USB port to connect the cable.This is important: If you have installed Nokia PC Suite 6.41 or later, you do not need to install Nokia Connectivity Cable Drivers, as they have already been installed with Nokia PC Suite.

The cable is recognized by computer only if we provide from outside a voltage around 3.3 V on "power in" pin (see figure 4). In normal use (connected to a mobile phone), this voltage comes from the phone battery. For this cable, the driver needed is "Nokia connectivity cable driver". It must be installed on computer before plugging the cable on USB.

Prolific website says the drivers that you can download from their siteno longer support PL-2303 rev A IC's (Yellow Mark Error Code 10 in Device Manager under WinXP, Vista, and 7). There was a workaround for that. We used the old PL-2303 Vista and XP drivers. Both are working well in Windows 7. For finding these drivers, use the internet search engines.

Converters with PL-2303HX having a RS232-3V serial interface can be connected directly to systems that have the same serial type (e.g. home routers, Raspberry Pi boards, LCD Displays and others). The things change when we are dealing with systems that have RS232 interface. This RS232 serial communication can reach voltages in the range from -15V to +15V. We need an additional transceiver (called "voltage level shifter" in some articles) from 3 V serial to RS232. The complete schematic of the converterfrom USB to RS232 (using CA-42 cable) I made is on figure 10. The circuit for transceiver is the typical application recommended in MAX3232 datasheet. It is powered with 3.3 V from USB using a LM2936Z-3.3 voltage regulator. RS232 serial in this converter does not includes all signals. It uses only RXD and TXD, enough to make the communication.

Depending on your phone model/capabilities, this process will vary. Bluetooth is by far the most convenient and compatible way, if both your phone and your computer have such capability. Some phones work over Bluetooth but do not do so over data cable, or vice-versa.

Connect your cable to the phone then to the computer. If your phone does USB it may prompt you with a mode selection choice. Choose "Default Mode" / "Nokia PC Suite mode". If you are not, make sure the "USB data cable" setting at Settings > Connectivity is set to "Default Mode" / "PC Suite", if any.

Note You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor's website.

Note You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor's website.